Integrated sensor network for monitoring steel corrosion in concrete structures


  • José Enrique Ramón Universitat Politècnica de València
  • José Manuel Gandía-Romero Universitat Politècnica de València
  • Manuel Valcuende Universitat Politècnica de València
  • Román Bataller Universitat Politècnica de València



sensor, corrosion, structure, steel


Corrosion is one of the main triggering factors affecting the service life and durability of structures. Several methods are used for corrosion studies but electrochemical techniques are the most commonly applied. Corrosion processes monitoring and control by means of non-destructive techniques, such as the implementation of embedded sensors, has been the target of many works.  It is possible to obtain relevant information of structural corrosion processes in real time. This document describes a system including specific equipment and which allows obtaining relevant information about these corrosion processes. This system is formed by a sensor network. There are several types of electrodes, which are distributed throughout the structure under study and a specific equipment developed by the research group, which is used to determine pertinent parameters such as the corrosion potential (Ecorr) and the corrosion density (icorr) by applying sequences of potentiostatic pulses. The system allows to reliably determine the corrosion rate in different areas of the structure. The sensor, due to its configuration, provides information of a specific area of the structure, but on the other hand it is involved in the galvanic events that can occur along the structure by differential aeration, galvanic cells, etc. because the sensor is not isolated from the structure.  This system also procures information of buried and submerged elements. Besides, it is possible to obtain information related to temperature, concrete resistance. The system includes specific potentiometric sensors to monitor chloride access and carbonatation processes.


Download data is not yet available.

Author Biographies

José Enrique Ramón, Universitat Politècnica de València

Instituto Interuniversitario de Investigación de Reconocimiento Molecular y Desarrollo Tecnológico (IDM)

José Manuel Gandía-Romero, Universitat Politècnica de València

Departamento de Construcciones Arquitectónicas

Instituto Interuniversitario de Investigación de Reconocimiento Molecular y Desarrollo Tecnológico

Manuel Valcuende, Universitat Politècnica de València

Departamento de Construcciones Arquitectónicas

Román Bataller, Universitat Politècnica de València

Instituto Interuniversitario de Investigación de Reconocimiento Molecular y Desarrollo Tecnológico (IDM)


Andrade C., Garcés P., Martínez I., Galvanic currents and corrosion rates of reinforcements measured in cells simulating different pitting areas caused by chloride attack in sodium hydroxide, Corrosion Science, 2008, vol. 50, pp. 2959–2964,

Andrade C., Martinez I., Alonso C., Fullea J., New Avanced Electrochemical Techniques for On Site Measurements of Reinforcement Corrosion. Materiales de Construcción, 2001, vol. 51, pp. 263-264.

Badea G.E., Caraban A., Sebesan M., Dzitac S., Cret P., Setel A., Polarisation Measurements Used for Corrosion Rates Determination, Journal of Sustenable Energy, 2010, vol. 1, nº1.

Castillo A., Andrade C., Martínez I., Rebolledo N., Fernández-Troyano L., Ayuso G., Cuervo J., Junquera J., Santana C., Delgado J., Evaluación y monitorización de la durabilidad de las cubiertas del Hipódromo de la Zarzuela de Madrid. Informes de la Construcción, 2011, vol. 63, nº 524, pp. 33-41,

Chang Zhen-Tian, Cherry Brian, Marosszeky Marton, Polarisation behaviour of steel bar samples in concrete in seawater. Part 1: Experimental measurement of polarisation curves of steel in concrete, Corrosion Science 2008, 50, pp. 357-364,

Chen Xu, Zhiyuan Li, Weiliang Jin, A New Corrosion Sensor to Determine the Start and Development of Embedded Rebar Corrosion Process at Coastal Concrete, Sensors, 2013, 13, pp. 13258-13275,

Duffó G., Farina S.B., Development of an embeddable sensor to monitor the corrosion process of new and existing reinforced concrete structures, Construction and Building Materials, 23, 2009, pp. 2746–2751,

Duffó G., Arva E.A., Schulz F.M., Vazquez D.R., Evaluation of the corrosion of a reinforced concrete designed for the construction of an intermediate-level radioactive waste disposal facility, Procedia Materials Science, 2012, 1, pp. 215–221,

Elsener B., Klinhoffer O., Frolund T., Rislund E., Schiegg Y., Bohni H., Assessment of reinforcement corrosion by means of galvanostatic pulse technique, International Conference on Repair of Concrete Structures. From theory to practice in a Marine Envionment. Svolvaer. Norway 20-30 may 1997. Edited by A. Blankvoll, Norwegian Public Road Administration, pp. 391 -400.

Fraaij A., Bijen J.M., de Haan Y.M., The reaction fly ash in concrete. A critical examination, Cement and concrete research 1989, 19, pp. 235-246.

Gao J., Wu J., Li J., Zhao X., Monitoring of corrosion in reinforced concrete structure using Bragg grating sensing. NDT&E International, 2011, vol. 44, pp. 202–205,

Gandía-Romero, J.M., Román Bataller, Pablo Monzón, Inmaculada Campos, Eduardo García-Breijo, Manuel Valcuende, Juan Soto, Characterization of embeddable potentiometric thick-film sensors for monitoring chloride penetration in concrete, Sensors and Actuators B: Chemical, Volume 222, January 2016, Pages 407-418.

Gandía-Romero, J.M., Campos, I. Valcuende, M. García-Breijo, E., Marcos, M.D., Payá, J. Soto, J., Potentiometric Thick-film sensors for measuring the pH of concrete, Cement and Concrete Composites, Available online 16 February 2016.doi /10.1016/j.cemconcomp.2016.02.006.

Garcés P., Climent L., Zornoza E., Corrosión de Armaduras en Estructuras de Hormigón Armado. Ed. Club Universitario. Alicante 2008, pp. 10-13.

Gonzalez J.A., Control de la corrosión. Estudio y medida por técnicas electroquímicas. Ed. CSIC, 1989, pp. 101-134.

González J.A., Miranda J.M., Consideraciones sobre los posibles mecanismos de corrosión de las estructuras de hormigón armado y sobre los factores que controlan su cinética. Revista de Metalurgia, 2004, 40, pp. 89-100.

Gonzalez J.A., Molina A., Escudero M.L., Andrade C., Errors in the electrochemical evaluation of very small corrosion rates–I: polarisation resistance method applied to corrosion of steel in concrete, Corros. Sci. 1985, 25, pp. 917–930.

Leung C.K.Y., Wan K.T., Chen L., A Novel Optical Fiber Sensor for Steel Corrosion in Concrete Structures, Sensors 2008, vol. 8, pp. 1960-1976.

Martínez I., Andrade C., Examples of reinforcement corrosion monitoring by embedded sensors in concrete structures, Cement & Concrete Composites, 2009, vol. 31, pp. 545–554,

Martínez R., Inhibidores de corrosión para hormigón armado, Hormigón preparado, 1998, vol. 38, pp. 48-50.

Rahman S.F.A., Ismail M., Noor N.MD., Bakhtiar H., Embedded Capacitor Sensor for Monitoring Corrosion of Reinforcement in Concrete, Journal of Engineering Science and Technology, 2012, vol. 7, nº 2, pp. 209–218.

Sagoe-Crentsil K. K., Glasser F. P., Analysis of the steel: concrete interface, in: corrosion of reinforcement in concrete, Elsevier Science Publishers Ltd. London, 1990, pp. 74-86.

Slater J., Corrosion of reinforcing steel in concrete: magnitude of the problem. Materials Performance. Jun. 1979, pp. 34-37.

Song Ha-Won, Saraswathy V., Corrosion Monitoring of Reinforced Concrete Structures – A Review, Int. J. Electrochem. Sci., 2007, vol. 2, pp. 1- 28.

Stern M., Weisert E. D., Experimental observations on the relation between polarization resistance and corrosion rate, Proc. Am. Soc. Test. Mater., 1959, 59, pp. 1280.

Van Delinder, L.S. A. Corrosion Basics, An Introduction, NACE 1984.

Zhao X., Gong P., Qiao G., Lu J., Lv X., OU J., Brillouin Corrosion Expansion Sensors for Steel Reinforced Concrete Structures Using a Fiber Optic Coil Winding Method. Sensors, 2011, vol. 11, pp. 10798-10819;

Reference Normative

ASTM C-876, Standard Test Method for Half-Cell Potential for Uncoated Reinforcing Steel in Concrete. American Society of Testing and Materials, Philadelphia, 1987.

UNE 112083 Medición del Potencial Libre en estructuras de H.A, año 2010.

ASTM WK37880, New Test Method for Measuring the Surface Resistivity of Hardened Concrete Using the Wenner Four-electrode Method. American Society of Testing and Materials, 2014.


Alcañiz M., Bataller R., Gandía-Romero, J.M., Ramón J.E., Soto J., Valcuende M., - Universidad Politécnica de Valencia, “Sensor, red de sensores, método y programa informático para determinar la corrosión en una estructura de hormigón armado”, nº ES2545669 (Patente de Invención concedida con Examen Previo), mayo 06, 2015.

Gandía-Romero, J.M., García-Breijo, E., Soto J., Valcuende M., - Universidad Politécnica de Valencia, “Sensor para la determinación de la profundidad y velocidad de carbonatación del hormigón”, nº ES2518065 (Patente de Invención concedida con Examen Previo), febrero 11, 2015.

Online Sources

The World Corrosion Organization. ‘Now is the Time’. George F. Hays PE., 2010, [21/01/2016].