Building archaeology informative modelling turned into 3D volume stratigraphy and extended reality time-lapse communication
DOI:
https://doi.org/10.4995/var.2022.15313Keywords:
building archaeology, stratigraphic unit (SU), HBIM, informative models, 3D volume stratigraphy, digitisationAbstract
This paper describes the case study of the damaged church of St. Francesco in the hamlet of Arquata del Tronto (Italy) that was struck by the earthquake in 2016. The municipality commissioned the research to support the preliminary design of the preservation plan. The first digitisation level has been started from the richness of surveying data acquired from static and dynamic terrestrial laser scanning (TLS), and photogrammetry, overcoming challenging constraints due to the scaffolding covering the surfaces. The geometric survey allowed authors to acquire massively geometric and material information supporting the three-dimensional (3D) volume stratigraphic and the creation of the Heritage Building Information Modelling (HBIM). The paper proposes a shift from the Geographic Information System (GIS)-based analysis of the materials toward spatial HBIM management. Building Archaeology is turned into HBIM 3D volume stratigraphy, overcoming the bidimensional (2D) surface mapping, in favour of a 3D understanding of direct and indirect sources. Material mapping is added to HBIM 3D volume stratigraphy, and each stratigraphic unit (SU) has its proprieties. The 3D volume stratigraphic database has been designed to collect the data on the unit detection at three levels (direct sources data collection, indirect data documentation, the relation among the BIM object elements). A common data environment (CDE) has been set up to share the 3D volume informative models that can be accessed, and all the information gathered. The knowledge transfer using the eXtended reality (XR) has been devoted to the citizen and tourist fruition, enhancing the comprehension of difficult concepts like the SUs to support a better critical 3D reconstruction. It includes the phases of construction across time-lapse documentation that validates related information within the building archaeology informative models leaving spaces to the uncertainty and documenting the relationship established so far thanks to the direct and indirect sources. The result obtained is a live digital twin that can be continuously updated, which justifies the costs and time demanding of HBIM despite 2D drawings.
Highlights:
• 3D survey and scan-to-HBIM process for the creation of a digital twin were oriented to the preliminary design of the preservation plan of the church of St. Francesco in Arquata del Tronto (Italy).
• Stratigraphy is investigated and oriented towards a digitisation process to share different levels of knowledge through new forms of digital-sharing such as Common Data Environment (CDE) and cloud-based BIM platform.
• eXtended reality (XR) is the final tool to reach new levels of communication and a wider audience characterised by experts in the construction sector and virtual and non-expert tourists.
Downloads
References
Adan, A., Xiong, X., Akinci, B., & Huber, D. (2011). Automatic creation of semantically rich 3D building models from laser scanner data. Proceedings of the 28th International Symposium on Automation and Robotics in Construction (ISARC) (pp. 343-348). https://doi.org/10.22260/ISARC2011/0061
Anselmi, S. (1977). Economia e società: le Marche tra XV e XX secolo. Società editrice il Mulino Bologna.
Altun, M., & Akcamete, A. (2019). A method for facilitating 4D modeling by automating task information generation and mapping. In I. Mutis, & T. Hartmann (Eds.), Advances in Informatics and Computing in Civil and Construction Engineering (pp. 479-486). Cham: Springer. https://doi.org/10.1007/978-3-030-00220-6_57
Banfi, F. (2020). HBIM, 3D drawing and virtual reality for archaeological sites and ancient ruins. Virtual Archaeology Review, 11(23), 16-33. https://doi.org/10.4995/var.2020.12416
Bartolini Salimbeni, L. (1993). Architettura francescana in Abruzzo : dal 13. al 18. secolo. Saggi Di Opus.
Boato, A., & Pittaluga, D. (2000). Building Archaeology: a non-destructive archaeology. In Proceedings of the 15th World Conference on Nondestructive Testing, Roma (Italy) (pp. 1-5). https://www.ndt.net/article/wcndt00/papers/idn365/idn365.htm
Boato, A. (2008). L'archeologia in architettura. Misurazioni, stratigrafie, datazioni, restauro. Venice: Marsilio Editore.
Bonelli, R. (1982). Introduzione. In R. Bonelli (Ed.), Francesco d'Assisi. Chiese e conventi (vol. 2, pp. 10). Milan: Electa.
Brogiolo, G. P. (2002). L'Archeologia dell'architettura in Italia nell'ultimo quinquennio (1997-2001). Arqueología de la Arquitectura, 1, 19-26, https://doi.org/10.3989/arq.arqt.2002.3
Brogiolo, G. P., & Cagnana, A. (2012). Archeologia dell'architettura. Metodi e interpretazioni. Florence: All'Insegna del Giglio.
Brumana, R., Stanga, C., & Banfi, F. (2021). Models and scales for quality control: toward the definition of specifications (GOA-LOG) for the generation and re-use of HBIM object libraries in a Common Data Environment. Applied Geomatics. https://doi.org/10.1007/s12518-020-00351-2
Brumana, R., Della Torre, S., Previtali, M., Barazzetti, L., Cantini, L., Oreni, D., & Banfi, F. (2018). Generative HBIM modelling to embody complexity (LOD, LOG, LOA, LOI): surveying, preservation, site intervention-the Basilica di Collemaggio (L'Aquila). Applied Geomatics, 10(4), 545-567. https://doi.org/10.1007/s12518-018-0233-3
Chiabrando, F., Lo Turco, M., & Rinaudo, F. (2017). Modeling the decay in an HBIM starting from 3D point clouds. A followed approach for cultural heritage knowledge. International Archives of the Photogrammetry, Remote Sensing & Spatial Information Sciences, 42(2W5), 605-612. https://doi.org/10.5194/isprs-archives-XLII-2-W5-605-2017
Ciociola, C., & Castelli, L. (2010). La Sindone di Arquata del Tronto tra storia e leggenda. Ascoli Piceno: FAS editore.
Cogima, C. K., Paiva, P. V. V., Dezen-Kempter, E., Carvalho, M. A. G., & Soibelman, L. (2019). The role of knowledgebased information on BIM for built heritage. Advances in Informatics and Computing in Civil and Construction Engineering, 27-34. https://doi.org/10.1007/978-3-030-00220-6_4
Comino, C. (1996). La Prefettura della Montagna di Norcia: una magistratura per il controllo territoriale nello Stato della Chiesa (1569-1630). Bollettino della Deputazione di storia patria per l'Umbria, 93(2), 83.
Comino, C. (2000). La Prefettura della Montagna come esempio di distrettuazione periferica. In P. Monacchia (Ed.), Ut bene regantur: politica e amministrazione periferica nello Stato ecclesiastico: atti del Convegno di studi, Perugia, 6-8 maggio 1997 (pp. 231-241). Modena: Mucchi.
Conti, A., Fiorini, L., Massaro, R., Santoni, C., & Tucci, G. (2020). HBIM for the preservation of a historic infrastructure: the Carlo III bridge of the Carolino Aqueduct. Applied Geomatics. https://doi.org/10.1007/s12518-020-00335-2
Costantino, D., Pepe, M., & Restuccia, A. G. (2021). Scan-to-HBIM for conservation and preservation of Cultural Heritage building: the case study of San Nicola in Montedoro church (Italy). Applied Geomatics. https://doi.org/10.1007/s12518-021-00359-2
Czortek, A. (2007). Frati Minori e comuni nell'Umbria del Duecento. In A. Musco, I. Palermo (Eds.) Convegno internazionale di studi. I Francescani e la politica (secc. 13.-17.). Palermo 3 - 7 dicembre 2002 Monreale e Sciacca 5 Dicembre (pp. 258). Officina di studi medievali Palermo.
De Angelis d'Ossat, G. (1982). Proporzioni e accorgimenti visuali negli interni. In R. Bonelli (Ed.), Francesco d'Assisi. Chiese e conventi (vol. 2, pp. 151-152). Milan: Electa.
De Meo, M. (2006). Tecniche costruttive murarie medievali. La Sabina. Rome: L'Erma di Bretschneider.
Della Torre, S. (2012). Renovation and post-intervention management. Annales-Anali Za Istrske in Mediteranske Studije - Series Historia et Sociologia, 22(2), 533-538.
Di Stroncone, A. (1887). L'Umbria Serafica. Miscellanea francescana di storia, di lettere, di arti, 2(4), 123.
Diara, F., & Rinaudo, F. (2019). From reality to parametric models of cultural heritage assets for HBIM. International Archives of the Photogrammetry, Remote Sensing & Spatial Information Sciences, ISPRS Archives 42(2/W15), 413-419. https://doi.org/10.5194/isprs-archives-XLII-2-W15-413-2019
Doglioni, F. (1997). Stratigrafia e restauro. Tra conoscenza e conservazione dell'architettura. 312.
Dore, C., Murphy, M., McCarthy, S., Brechin, F., Casidy, C., & Dirix, E. (2015). Structural simulations and conservation analysis-historic building information model (HBIM). International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 40(5W4), 351-357. https://doi.org/10.5194/isprsarchives-XL-5-W4-351-2015
Fai, S., & Sydor, M. (2013). Building Information Modelling and the documentation of architectural heritage: Between the "typical" and the "specific." Proceedings of the DigitalHeritage 2013 (Vol. 1, pp. 731-734). https://doi.org/10.1109/DigitalHeritage.2013.6743828
Galiè, N., & Vecchioni G. (2006). Arquata del Tronto. Il comune dei due Parchi Nazionali. Folignano (Ascoli Piceno): Società Editrice Ricerche.
Gironacci, I. M. (2020). State of the Art of Extended Reality Tools and Applications in Business. 105-118. https://doi.org/10.4018/978-1-7998-4339-9.ch008
Heesom, D., Boden, P., Hatfield, A., Rooble, S., Andrews, K., & Berwari, H. (2021). Developing a collaborative HBIM to integrate tangible and intangible cultural heritage. International Journal of Building Pathology and Adaptation, 39(1), 72-95. https://doi.org/10.1108/IJBPA-04-2019-0036
Ioannides, M., Magnenat-Thalmann, N., & Papagiannakis, G. (2017). Mixed Reality and Gamification for Cultural Heritage. Cham: Springer. https://doi.org/10.1007/978-3-319-49607-8
Jang, J., Ko, Y., Shin, W. S., & Han, I. (2021). Augmented Reality and Virtual Reality for Learning: An Examination Using an Extended Technology Acceptance Model. IEEE Access, 9, 6798-6809. https://doi.org/10.1109/ACCESS.2020.3048708
Jung, K., Nguyen, V. T., & Lee, J. (2021). BlocklyXR: An Interactive Extended Reality Toolkit for Digital Storytelling. Applied Sciences, 11(3), 1073. https://doi.org/10.3390/app11031073
Kivilcim, C. Ö., & Duran, Z. (2021). Parametric Architectural Elements from Point Clouds for HBIM Applications. International Journal of Environment and Geoinformatics, 8(2), 144-149. https://doi.org/10.30897/ijegeo.803334
Lerma, J. L., Navarro, S., Cabrelles, M., & Villaverde, V. (2010). Terrestrial laser scanning and close range photogrammetry for 3D archaeological documentation: the Upper Palaeolithic Cave of Parpalló as a case study. Journal of Archaeological Science, 37(3), 499-507. https://doi.org/10.1016/j.jas.2009.10.011
Li, Y., Dong, K., & Li, G. F. (2014). The Application of BIM in the Restoration of Historical Buildings. Applied Mechanics and Materials, 638-640, 1627-1635. https://doi.org/10.4028/www.scientific.net/AMM.638-640.1627
Lo Turco, M., Calvano, M., & Giovannini, E. C. (2019). Data modelling for museum collections. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XLII-2/W9, 433-440. https://doi.org/10.5194/isprs-archives-XLII-2-W9-433-2019
Loaiza Carvajal, D. A., Morita, M. M., & Bilmes, G. M. (2020). Virtual museums. Captured reality and 3D modeling. Journal of Cultural Heritage, 45, 234-239. https://doi.org/10.1016/j.culher.2020.04.013
Mannoni, T. (1994). Caratteri costruttivi dell'edilizia storica. Genova: ESCUM Sagep Editrice.
Massari G. A. (2018) From Integrated Design to BIM. In Castaño Perea E., Echeverria Valiente E. (Eds.), Architectural Draughtsmanship. EGA 2016. Springer, Cham. https://doi.org/10.1007/978-3-319-58856-8_85
Mol, A., Cabaleiro, M., Sousa, H. S., & Branco, J. M. (2020). HBIM for storing life-cycle data regarding decay and damage in existing timber structures. Automation in Construction, 117. https://doi.org/10.1016/j.autcon.2020.103262
Nieto Julián, J. E., Lara, L., & Moyano, J. (2021). Implementation of a TeamWork-HBIM for the Management and Sustainability of Architectural Heritage. Sustainability, 13(4), 1-26. https://doi.org/10.3390/su13042161
Nieto Julián, J., Moyano Campos, J., & García, Á. (2019). Construction study of the Palace of the Children of Don Gome (Andújar, Jaén), managed through the HBIM project. Virtual Archaeology Review, 10(20), 84-97. https://doi.org/10.4995/var.2019.10567
Oriel, E., & Clare, P. (2015). HBIM and matching techniques: considerations for late nineteenth- and early twentieth-century buildings. Journal of Architectural Conservation, 21(3), 145-159. https://doi.org/10.1080/13556207.2016.1139852
Pan, Y., & Zhang, L. (2021). A BIM-data mining integrated digital twin framework for advanced project management. Automation in Construction, 124. https://doi.org/10.1016/j.autcon.2021.103564
Pybus, C., Graham, K., Doherty, J., Arellano, N., & Fai, S. (2019). New Realities For Canada's Parliament: A Workflow For Preparing Heritage Bim For Game Engines And Virtual Reality. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42(2/W15), 945-952. https://doi.org/10.5194/isprs-archives-XLII-2-W15-945-2019
Quattrini, R., Pierdicca, R., & Morbidoni, C. (2017). Knowledge-based data enrichment for HBIM: Exploring high-quality models using the semantic-web. Journal of Cultural Heritage, 28, 129-139. https://doi.org/10.1016/j.culher.2017.05.004
Reina Ortiz, Ortiz, M., Yang, C., Weigert, A., Dhanda, A., Min, A., Gyi, M., Su, S., Fai, S., & Santana Quintero, M. (2019). Integrating heterogeneous datasets in HBIM of decorated surfaces. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42(2/W15), 981-988. https://doi.org/10.5194/isprs-archives-XLII-2-W15-981-2019
Stanga, C., Spinelli, C., Brumana, R., Oreni, D., Valente, R., & Banfi, F. (2017). A N-D virtual notebook about the basilica of s. Ambrogio in Milan: Information modeling for the communication of historical phases subtraction process. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42(2W5), 653-660. https://doi.org/10.5194/isprs-archives-XLII-2-W5-653-2017
Simeone, D., Cursi, S., & Acierno, M. (2019). BIM semantic-enrichment for built heritage representation. Automation in Construction, 97, 122-137. https://doi.org/10.1016/j.autcon.2018.11.004
Trunfio, M., Lucia, M. D., Campana, S., & Magnelli, A. (2021). Innovating the cultural heritage museum service model through virtual reality and augmented reality: the effects on the overall visitor experience and satisfaction. Journal of Heritage Tourism, 1-19. https://doi.org/10.1080/1743873X.2020.1850742
Tucci, G., Conti, A., Fiorini, L., Corongiu, M., Valdambrini, N., & Matta, C. (2019). M-BIM: a new tool for the Galleria dell'Accademia di Firenze. Virtual Archaeology Review, 10(21), 40-55. https://doi.org/10.4995/var.2019.11943
Valente, R., Brumana, R., Oreni, D., Banfi, F., Barazzetti, L., & Previtali, M. (2017). Object-oriented approach for 3D archaeological documentation. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42(2W5), 707-712. https://doi.org/10.5194/isprs-archives-XLII-2-W5-707-2017
Valinejadshoubi, M., Bagchi, A., & Moselhi, O. (2018). Identifying At-Risk Non-Structural Elements in Buildings Using BIM: A Case Study Application. Journal of Earthquake Engineering, 24(5), 869-880. https://doi.org/10.1080/13632469.2018.1453407
Volk, R., Stengel, J., & Schultmann, F. (2014). Building Information Models (BIM) for existing buildings - literature review and future needs. Automation in Construction, 38, 109-127, https://doi.org/10.1016/j.autcon.2013.10.023
Wadding, L. (1628). Annales minorum in quibus res omnes trium ordinum a S. Francisco (vol. 2, pp. 31). Lione: Claudii Landry Lugduni.
Wadding, L. (1733) Annales Minorum Seu Trium Ordinum A S. Francisco Institutorum (pp. 17). Rome: Tipi Rochi Bernabò.
Downloads
Published
How to Cite
Issue
Section
License
This journal is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
